Collection: Golf Clubmaking/Repairs

Black .335" Half Ring Ferrules, length .250", .505" outside diameter, .335" inside diameter. Pack of 12.

A complete selection of ferrules with modern outside diameters that match perfectly to the outside diameter of our hosels. All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!

Pack of 12 X Long Black .335" Wood Ferrules.

Length .788", OD .510", ID .335".

All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!

Replacement bolt and washer for the Ping G430, G425 & G410 Hybrid.

A must-have when adding lead or tungsten powder down a steel shaft to increase swingweight. Apply a small film of epoxy to the cork and force down the shaft with a ram rod to secure powdered weight. 25 per pack.

Corks for Wood Shafts, Iron corks also available

PRO-FIX 5/15 QUICK CURE ADHESIVE is a toughened medium-viscosity impact resistant two part epoxy that gives the strength of long cure adhesives. Quick cure has a gel time of 5-8 minutes and a playable strength within 20-30 minutes as standard temperature (allow longer times for colder temps) Superior bond strength on all shaft types

• Very easy to use squeeze bottle
• 1:1 mix ratio by volume.
• Cure in 20-30 minutes.
• Easy cleanup
• 16oz kit consists of 2 x 8oz bottles

MIZUNO SHAFT ADAPTOR. THIS IS THE LATEST ADAPTOR FROM THE ST190 & ST190G DRIVER HEAD. THIS WILL ALSO FIT THE OLDER ST180,GT180 AND EZ DRIVER HEADS. RIGHT HANDED, ALLOWS FOR LOFT ADJUSTMENT +/- 2 DEGREES, FITS A .335" SHAFT.

This set of five extractors will cover needs ranging from removing broken shafts from hosels to extracting soleplate or insert screws.

Replacement ferrule for the Callaway Opti-Fit .335" Shaft Adaptors, Ai Smoke, Paradym, Epic, Rogue,XR, X2Hot Factory replacement ferrule in Black. Available in .335".

PRO-FIX 20/20 gives aerospace performance at an affordable price. The long cure product has a 25 minute working time with full cure in 20 hours. The vicosity of both parts A & B is the same and mixed 1:1 by weight or volume.

16oz

High quality aftermarket TaylorMade shaft adaptors allow for multiple shaft and length options to be used in the Qi35, Qi10, STEALTH, SIM, M1, M2, M3, M4, M5, M6, SLDR or R15 drivers and fairways for less than the cost of re-shafting.

Left Handed .335" - 4 Degree Adaptor.

Gallon Bottle. Bramptons Grip Solvent is non flammable, non toxic, non ozone depleting. It is colourless and odourless and allows for very effective grip installation. Works with any double sided grip tape and prevents dermatitis by incorporating skin emollients in the formulation.

Due to the weight this product is not available for shipping to Europe.

This Ping shaft adaptor sleeve allows for multiple shafts to be used in the Ping G430 drivers and fairway woods at a fraction of the cost of re-shafting. Available in RH, (RIGHT HANDED) .335". Suitable for the G430, G425 & G410 heads.....