Collection: Golf Swing Weighting

A must-have when adding lead or tungsten powder down a steel shaft to increase swingweight. Apply a small film of epoxy to the cork and force down the shaft with a ram rod to secure powdered weight. 25 per pack.

Corks for Iron Shafts, Wood corks also available

A must-have when adding lead or tungsten powder down a steel shaft to increase swingweight. Apply a small film of epoxy to the cork and force down the shaft with a ram rod to secure powdered weight. 25 per pack.

Corks for Wood Shafts, Iron corks also available

Brass Shaft Tip Weights are epoxied into the shaft tip during assembly to achieve you desired swing weight. Suitable for .355" Taper Tip shafts. All weights have a full length hole to allow air escape when being epoxied. Can be cut or filled to reduce weight if necessary. 

Brass Shaft Tip Weights are epoxied into the shaft tip during assembly to achieve you desired swing weight. Suitable for .355" Taper Tip shafts. All weights have a full length hole to allow air escape when being epoxied. Can be cut or filled to reduce weight if necessary. 

Ideal for fitting, use lead tape as temporary weight on the back of both wood and iron clubs to achieve correct total weight and swingweight. It is adhesive backed and can be applied quickly and easily or left on permanently. It will not damage wood finishes.

Small Roll, 1/2" wide, 100" long