Collection: Golf Clubmaking/Repairs

Pack of 12 Standard Length Black .335" Wood Ferrules.

Length .550", OD .525", ID .335".

All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!

Short Roll of 2" solvent activated grip tape.

Premium quality, as used by professional club fitters and pro shops, enough tape to regrip approximately 14 clubs.

PRO-FIX 5/15 QUICK CURE ADHESIVE is a toughened medium-viscosity impact resistant two part epoxy that gives the strength of long cure adhesives. Quick cure has a gel time of 5-8 minutes and a playable strength within 20-30 minutes as standard temperature (allow longer times for colder temps) Superior bond strength on all shaft types

• Very easy to use squeeze bottle
• 1:1 mix ratio by volume.
• Cure in 20-30 minutes.
• Easy cleanup
• 8oz kit consists of 2 x 4oz bottles.

Aftermarket Titleist surefit adapter.

This is .335", and will fit all GT/TSR/TSi/TS/917/915/913 fairway wood heads. . Matching collared ferrule included.

Pack of 12 X Long Black .370" Iron Ferrules.

Length .788", OD .540", ID .370".

All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!

Use these steel shaft butt extensions to extend shafts and increase the length of clubs. The extensions are double length. When cut in two, each section has an end tapered to fit inside the shaft being extended. Simply apply epoxy, slide the extender into the shaft butt, allow to try and cut to length.

To Fit .580" Butt Size

25 strips of 2" wide x 9" long solvent activated double sided golf grip tape.

Premium quality, as used by professional club fitters and pro shops.

Now available in this handy 4oz Spray Bottle. Bramptons Grip Solvent is non flammable, non toxic, non ozone depleting. It is colourless and odourless and allows for very effective grip installation. Works with any double sided grip tape and prevents dermatitis by incorporating skin emollients in the formulation.

Use these plastic shaft butt extensions to extend shafts and increase the length of clubs. The extensions are single ended plastic. Simply apply epoxy, slide the extender into the shaft butt, allow to try and cut to length. Will fit almost any graphite shaft.

The PXG aftermarket shaft adaptor will alter the loft (+/-) 1.5 degrees on all PXG adjustable driver and fairway heads to optimize the trajectory and dispersion to fit individual golf swings. Available in 1.5 degree offset - .335".

Hosel shaft adaptor for your adjustable Cobra AeroJet, LTDx, F9, SZ, RAPSPEED driver. Right Handed, fits a .335" tip shaft.

A great tool for removing grips. The v-shape provides a channel to funnel solvent to where you need it most, loosening the tape, and it also strengthens the tool to give you some leverage to work the grip loose. If you are removing the grip to butt trim or extend the shaft, you can re-use the grip after using this tool.

Simply fold back the lip on the grip and slide the tool underneath. Pour a bit of solvent in the groove as you work up and around the grip. A little bit of patience will go along way as you let the solvent do its work.